The technical requirements for pin fasteners mainly include material properties, dimensional accuracy, structural quality, surface treatment, and assembly performance. Appropriate materials should be selected based on the actual usage environment and stress conditions. Common materials include carbon steel, alloy steel, and stainless steel, ensuring that the materials possess the required strength, hardness, and toughness. Regarding dimensions, key parameters such as the pin's diameter, length, roundness, straightness, and end chamfer must be strictly controlled to ensure a proper fit between the product and the mounting hole. For pins requiring high positioning accuracy, dimensional tolerances and surface roughness should be carefully controlled to avoid installation difficulties, inaccurate positioning, or loosening during use due to dimensional deviations. Furthermore, the product surface must be free from defects that affect performance, such as obvious cracks, burrs, dents, and corrosion.
The technical requirements for rivet fasteners mainly focus on material plasticity, riveting strength, dimensional stability, and forming quality. Since rivets require plastic deformation to form a joint during installation, the material must not only possess sufficient mechanical strength but also good ductility and formability to prevent cracking, breakage, or insufficient deformation during riveting. During product design and manufacturing, the head diameter, shank length, shank diameter, and head shape should be reasonably determined based on the thickness and structural requirements of the materials being connected. For blind rivets, it is also necessary to control the fit between the mandrel and the rivet body, as well as the final dimensions after riveting.
