During the installation and use of pins, it is essential to first confirm that the product specifications, dimensions, and materials meet the actual assembly requirements to avoid positioning deviations or insecure connections due to improper selection. Before installation, the surface quality of the pin and mounting hole should be inspected to ensure there are no obvious burrs, rust, deformation, or foreign matter residue. For pins with interference fits, the installation direction and pressing force should be controlled to avoid pin bending, hole deformation, and surface damage caused by forceful hammering or excessive pressure. For parts that need to withstand large shear loads or long-term vibration, the fit and wear of the pins should be monitored, and regular checks should be conducted for loosening, breakage, and abnormal deformation to ensure the stability of the connection.
During use, the appropriate rivet type and specifications should be selected based on the thickness and material of the materials being connected and the installation space. Before installation, it should be confirmed that the diameter, position, and wall quality of the pre-drilled hole meet the requirements to avoid loosening due to an oversized hole or preventing proper installation of the rivet due to an undersized hole. During riveting, the appropriate riveting tool should be selected based on the rivet type, and the riveting pressure, stroke, and forming state should be reasonably controlled to ensure the complete formation of the rivet head and a tight fit between the joints. For blind rivets, the working condition of the riveting tool should also be checked to ensure that the mandrel can be broken or locked normally, avoiding problems such as incomplete riveting, rivet deformation, and insufficient clamping force. After riveting, the appearance of the rivet head, the connection gap, and the fixing effect should be checked, and any abnormalities should be dealt with promptly.
For structures subjected to vibration, impact, or alternating loads for extended periods, the joints should be regularly inspected for fatigue cracks, loosening, wear, and deformation. Furthermore, during equipment disassembly and maintenance, unsuitable tools should be avoided to forcibly remove pins or rivets, as this may damage surrounding components. In particular, rivets are permanent connectors and are generally not recommended for reuse after disassembly; new, qualified rivets should be replaced according to product requirements. Through standardized selection, correct installation, and regular inspection, the connection reliability of fasteners can be effectively improved, extending the service life of equipment and components.
