In practical use, pins and rivets may be exposed to moisture, salt, acids, alkalis, and industrial chemicals for extended periods. Different corrosive environments can affect the surface quality, material properties, and connection reliability of the products to varying degrees. Common corrosive media include water, moisture, salt spray, acidic solutions, alkaline solutions, and industrial waste gases. In humid environments, carbon steel and ordinary alloy steel are prone to oxidation and rust, and prolonged exposure may lead to surface corrosion, pitting, and even localized cross-sectional loss. In coastal areas or saline environments, chloride ions accelerate the corrosion process on metal surfaces, potentially adversely affecting ordinary steel and some stainless steel materials. Therefore, during product design and material selection, it is crucial to fully consider the corrosive media and exposure time in the actual operating environment.
The effects of different corrosive media on pins and rivets also vary. Acidic media may accelerate chemical corrosion of metal surfaces, leading to material thinning, changes in surface roughness, and a decline in mechanical properties; alkaline media may corrode some aluminum alloys, zinc, and their surface treatment layers. Sulfides, chlorides, and other chemical gases in industrial production environments can also react with metal surfaces to form corrosion products. Furthermore, when different metal materials are in direct contact and in humid or saline environments, galvanic corrosion may occur, preferentially corroding the more reactive metal. For fasteners subjected to long-term vibration and mechanical loads, corrosion may interact with fatigue, increasing the risk of connection failure.
Therefore, appropriate protective measures should be taken based on the product material, service life, and actual operating conditions, depending on the corrosive environment. Ordinary carbon steel pins and rivets can have their corrosion resistance improved through galvanizing, nickel plating, phosphating, or other suitable surface treatments. For coastal, outdoor, and chemically corrosive environments, suitable stainless steel or corrosion-resistant alloy materials can be selected based on the type of medium. Simultaneously, attention should be paid to the electrochemical compatibility between different materials; insulating gaskets or isolation structures should be used when necessary to reduce galvanic corrosion. For products with high reliability requirements, corrosion resistance should be verified through salt spray testing, damp heat testing, and corresponding chemical immersion testing to ensure that pins and rivets maintain good structural integrity and connection stability during actual use.
