Inspection methods for screws and bolts / external threaded parts

Oct 16, 2026 Leave a message

The inspection of screws, bolts, and external threaded parts is primarily to confirm whether the dimensional accuracy, mechanical properties, thread quality, and surface condition of the products meet relevant technical standards and design requirements, ensuring that the connectors have sufficient strength and reliability during actual use. First, visual inspection is the most basic method, mainly involving visual observation or the use of a magnifying glass to check the product surface for cracks, burrs, rust, dents, scratches, and obvious processing defects. Simultaneously, the thread portion is checked for issues such as misaligned threads, missing threads, deformation, and damage. Second, dimensional inspection mainly utilizes measuring tools such as vernier calipers, outside micrometers, thread ring gauges, thread plug gauges, and height gauges to measure the nominal diameter, thread length, shank length, head size, pitch, and thread accuracy of the bolts. For external threads, thread ring gauges are typically used for go/no-go checks to determine whether the thread dimensions and fit accuracy meet requirements. For products with high precision requirements, specialized thread measuring instruments are also needed to check parameters such as the thread pitch diameter, thread angle, and pitch. In addition, it is necessary to check the structural dimensions of the connector, such as the head shape, straightness of the shank, and end chamfers, to ensure proper installation and a good fit with the corresponding nut or threaded hole.

 

Mechanical performance testing mainly includes tensile strength testing, guarantee load testing, hardness testing, and necessary torsion testing. Specialized testing equipment is used to test the strength, deformation, and load-bearing capacity of the connector under stress to determine if it meets the specified performance grade requirements. For high-strength bolts and important load-bearing connectors, corresponding decarburization layer, re-tempering, wedge load, and fatigue performance tests are also required according to product standards to ensure that they will not fail due to material defects or processing problems during long-term use. Surface quality inspection mainly targets galvanizing, blackening, phosphating, and other surface treatment processes, checking for coating uniformity, blistering, peeling, incomplete plating, and obvious corrosion. For stainless steel connectors, their corrosion resistance should also be checked according to the operating environment. For mass-produced threaded connectors, a combination of sampling inspection and process quality control is usually used to inspect raw materials, processing steps, heat treatment, and final products in stages. By conducting comprehensive inspections of appearance, dimensions, mechanical properties, and surface quality, problems with products can be identified in a timely manner, preventing unqualified connectors from entering the assembly process, thereby improving the assembly quality and operational safety of mechanical equipment.