The common specifications of screws, bolts, and externally threaded parts are mainly determined by parameters such as thread type, nominal diameter, pitch, length, head structure, and performance grade. In mechanical manufacturing, the most common type is the metric standard thread, whose thread designation is usually represented by the letter "M," such as M4, M5, M6, M8, M10, M12, M16, M20, and M24. The number represents the nominal diameter of the thread, in millimeters. Based on the pitch, standard threads are further divided into coarse and fine threads. Coarse threads are more widely used and have advantages such as easy processing and high assembly efficiency; fine threads have advantages such as smaller pitch and higher adjustment precision, and are often used in thin-walled parts, precision machinery, and applications requiring high connection reliability. Besides the thread diameter and pitch, the bolt length is also an important specification parameter, with common lengths including 10mm, 16mm, 20mm, 25mm, 30mm, 40mm, 50mm, 60mm, 80mm, and 100mm. Different types of connectors also have different head sizes and shapes. Common types include hex head bolts, socket head cap screws, pan head screws, countersunk head screws, and external hex bolts, which need to be selected based on the installation space, tool usage conditions, and connection method.
In addition to determining the size specifications, screws, bolts, and external threaded components should also be selected based on the working load and operating environment, choosing the appropriate material and performance grade. Common carbon steel bolt performance grades include 4.8, 5.8, 8.8, 10.9, and 12.9, with grades 8.8 and above typically used for mechanical connections bearing heavy loads. For equipment in humid, corrosive, or special environments, threaded connectors made of stainless steel such as 304 and 316 are frequently used. Furthermore, commonly used external threaded components include studs, set screws, fully threaded studs, and self-tapping screws, which differ in structure and application. For example, double-ended studs are typically used in structures requiring frequent disassembly and assembly or connecting thicker parts; set screws are mainly used for positioning and fixing shafts and hubs; and self-tapping screws are suitable for some connections where pre-machining of the internal threads is not required. When selecting specifications, designers should comprehensively consider the stress on the connectors, installation space, the thickness of the materials being connected, the thread engagement length, and assembly and disassembly requirements, prioritizing specifications that conform to national or industry standards to ensure good interchangeability and reliable connection between parts.
