Structural Design Of Cold-forged Irregular Structural Parts / Embedded Inserts

Sep 01, 2026 Leave a message

The design of cold-forged irregular structural parts requires comprehensive consideration of the product's actual operating conditions, assembly requirements, and processing technology. Compared to standard fasteners, irregular structural parts typically feature steps, bosses, grooves, irregular heads, and asymmetrical contours. Therefore, the design process must not only meet the product's dimensional accuracy and connection strength requirements but also fully consider the material flow during cold forging. Properly controlling the dimensional proportions, transition radii, and cross-sectional changes of each part can reduce uneven material flow, localized cracking, and forming defects, improving the product's forming stability and production efficiency.

 

The structural design of embedded inserts focuses more on the bonding effect between the insert and the base material, as well as the positioning stability during subsequent injection molding or die casting. The design typically requires the appropriate use of knurling, annular grooves, straight lines, bosses, or anti-rotation structures based on the product's installation location and stress direction to enhance the insert's pull-out resistance and torsional performance. Simultaneously, the insert's external dimensions, embedment depth, wall thickness, and end structure should be considered to avoid affecting product strength due to excessively thin local structures or concentrated stress. For products requiring high assembly precision, reasonable dimensional tolerances must be allowed to ensure the stability of inserts during actual production and assembly.

 

The structural design of cold-forged irregular-shaped parts and embedded inserts cannot be limited to determining the dimensions on the drawings; it must also consider the mold structure, forming process, and the feasibility of mass production. For products with complex structures, the cold-forging direction, material deformation, and dimensional changes between each process should be analyzed in advance. If necessary, multi-station forming should be used to gradually complete the complex contours to avoid excessive deformation in a single process. After the design is completed, the key dimensions, mechanical properties, pull-out resistance, and assembly effect should be verified in conjunction with sample production, and structural details should be adjusted based on the actual trial production results. This ensures that the product meets the usage requirements and also helps reduce mold development risks and subsequent mass production costs.