Force Distribution Of Screws/bolts/externally Threaded Parts

Sep 15, 2026 Leave a message

Screws, bolts, and threaded fittings are subjected to various forms of external loads during actual operation, primarily including axial tension, axial compression, transverse shear, bending, and torsional loads. Axial tension is one of the most common forms of stress on threaded connections. When a bolt connects two parts subjected to forces acting in opposite directions, the bolt experiences tension along its own axis, resulting in elastic deformation. If the external tension exceeds the material's strength, bolt elongation, thread damage, or even bolt breakage may occur. Axial compression mainly occurs in threaded structures subjected to pressure. Under pressure, the connection undergoes compressive deformation. When a slender bolt is subjected to significant axial pressure, instability and bending issues must be considered. Transverse shear typically occurs when two connected parts are subject to relative sliding. In this case, the bolt shank must withstand shear force perpendicular to the axis. Excessive shear load can lead to shear fracture of the bolt or significant displacement of the connection. Furthermore, when the connection is subjected to eccentric loads or improper installation, bending stress may occur, causing tension on one side of the bolt and compression on the other, thus affecting the overall stability of the connection structure.

 

Screws, bolts, and threaded fittings are subjected to both torsional and alternating loads during tightening and operation. During installation, the tightening torque applied by the wrench causes torsional deformation in the bolt, while friction between the threads affects the formation of preload. Therefore, bolts are typically under a combined tensile and torsional stress state during tightening. During long-term operation, if the connection is subjected to mechanical vibration, impact, or periodically changing external forces, threaded connections will also bear repeatedly changing alternating loads, easily leading to fatigue damage at stress concentration points such as the thread root, and in severe cases, fatigue fracture. Furthermore, the preload of threaded connections must be considered. A reasonable preload ensures sufficient clamping between the connected parts, reducing relative slippage between the connecting surfaces and improving structural stability and vibration resistance. However, excessive preload may cause bolt yielding, thread stripping, or damage to the connection; insufficient preload can easily lead to loosening of the connection, affecting normal equipment operation. Therefore, in the mechanical design process, it is necessary to conduct a comprehensive analysis of the stress conditions such as tension, shear, bending, torsion and fatigue of the threaded connection based on the actual working conditions, and to reasonably determine the bolt specifications, material strength and preload to ensure that the connection structure has sufficient load-bearing capacity and reliable use.