The working principle of a pin is mainly to utilize its own geometric structure and fitting dimensions to achieve positioning, limiting, and fixing between different components. When a pin is installed in the corresponding holes of two parts, a connection is formed through clearance fit, transition fit, or interference fit, maintaining a relatively stable positional relationship between the components. Under external loads, the pin can limit the relative movement between parts by withstanding shear force, thereby ensuring the assembly accuracy and operational stability of the mechanical structure. For elastic pins, their working principle mainly relies on their own elastic deformation to generate radial pressure, maintaining a certain contact force between the pin and the mounting hole wall, achieving the effect of fixing and preventing loosening. Different types of pins will adopt different structural forms according to the application requirements to meet the needs of positioning accuracy, connection strength, and ease of assembly and disassembly.
The working principle of a rivet is mainly to use external force to cause plastic deformation at the end of the rivet shank, forming a rivet joint, thereby firmly connecting two or more components together. During installation, the rivet is first passed through the pre-drilled hole of the parts to be connected, and then pressure is applied to the rivet head and shank using riveting equipment, causing the end of the rivet shank to gradually expand and form a upset head. Finally, the clamping force generated by the rivet joints at both ends fixes the connecting parts. For blind rivets, pulling the internal core causes the rivet body to expand and deform, forming a stable mechanical connection to secure thin plates or multi-layered structural components. After riveting, the connection typically does not require threaded fitting, resulting in a compact structure, high installation efficiency, and good vibration resistance.
While both pins and rivets can connect mechanical parts, their force application and fixing mechanisms differ. Pins primarily rely on the fit between the hole and the pin, as well as the pin's shear strength, for positioning and fixation; some types can be disassembled and reused. Rivets, on the other hand, rely on the plastic deformation forming the rivet joint and clamping action to achieve a permanent connection, and are generally not suitable for non-destructive disassembly. In practical applications, the appropriate connection method must be selected based on the structural characteristics of the components, the direction of force, the working environment, and subsequent maintenance requirements. A reasonable structural design and installation process can effectively improve connection reliability and reduce problems such as loosening, deformation, and fatigue damage.
