Mechanical properties of cold-forged irregular structural parts / embedded inserts

Oct 04, 2026 Leave a message

The mechanical properties of cold-forged irregular structural components are mainly reflected in tensile strength, yield strength, hardness, elongation, and fatigue resistance. Since these products are typically plastically formed through cold forging, the material undergoes work hardening during processing, thereby increasing local strength and surface hardness. For irregular structural components bearing large loads, it is crucial to focus on the tensile, shear, and bending properties to prevent deformation, fracture, or fatigue damage under long-term stress. Simultaneously, the product must not have obvious forming defects such as folds or cracks, otherwise stress concentration can easily occur, affecting overall mechanical properties. Therefore, during material selection and process design, the original state of the material, the degree of cold forging deformation, and subsequent heat treatment requirements must be comprehensively considered to ensure the product possesses sufficient strength and toughness.

 

The mechanical properties of embedded inserts mainly depend on the strength of the metal material itself and the reliability of the connection between the insert and the plastic or other matrix material. In addition to conventional tensile strength, hardness, and yield strength, it is also necessary to focus on pull-out force, torsional resistance, thread load-bearing capacity, and resistance to loosening. Pull-out resistance primarily reflects the insert's ability to resist pull-out under axial tensile force, while torsional resistance evaluates whether the insert is prone to rotation under screw tightening or external torque. For inserts with knurling, annular grooves, and anti-rotation bosses, their structural dimensions and surface morphology directly affect the mechanical engagement with the substrate. Furthermore, the threaded portion of the insert must possess sufficient load-bearing capacity to prevent stripping, deformation, or damage during repeated assembly.

 

The mechanical properties of cold-forged irregular structural parts and embedded inserts need to be verified through targeted testing and experiments. Routine testing items include hardness testing, tensile testing, compression testing, and necessary fatigue performance testing. For embedded inserts, pull-out resistance, torsional resistance, and thread torque testing should also be conducted based on actual injection molding or press-fitting conditions. For automotive parts, electronic equipment, and other products with high reliability requirements, the effects of temperature changes, vibration, and long-term loads on connection performance must also be considered. It is important to note that mechanical performance indicators should be determined based on material grade, product dimensions, heat treatment state, and customer technical requirements; uniform values ​​cannot be simply applied.